Fittings Kit Includes:
- Through bolts M10 120mm x2
- X2 Oak mushroom caps 25mm
- For the following brackets (section size 75mm)
Resin Kit Includes:
- x2 resin set 160mm M12
- X2 mushroom caps
Dual pitch profiled brace bracket, mortise and tenon jointed, 800mm high, 800mm projection, head and upright 100mm x 75mm, brace 150mm x 50mm, SWL 191kg, weight 10.5kg.
- The price listed is for a single product not per pair.
- .Technical- The timber is FSC COC European redwood, kiln dried. All joints are stop mortise and tenon, the joints are glued with urea formaldehyde powder resin mixed with water and brush applied to tenons. Finish Planed all round timber. All curved surfaces bandsawn, and spindle moulder planned to profile. Bevels are 10mm and 12mm across the flats. All seen surfaces are twice sanded (80s grit and 100s grit) sandpapers, all arises are removed with glass-paper. Stop bevels are applied to leading edges of the head and upright and to four edges of the brace, the bevels are also returned to the inside of the ends of the head and upright. The leading edge of the brace has double convex and concave curves with a plumb cut in the center and at the foot. All joints secured with headless aluminium pins. The safe working load has been calculated at a factor of safety of six. Structural calculations to find the load should be obtained to prove the suitability of the product for your application. Dip treated with micro porus base coat stain.
- Price excludes delivery. Product is available for next day delivery
- Optional fixing kit available, see fixings section.