Period Door Canopies

Turton Period Door Canopy

The Turton Door Canopy is a high quality duel pitch softwood joinery product, designed to suit single door openings from 900mm to 1010mm wide. The canopy can receive tiles, slate or felt tiles this design allows the use of ridge tiles and is dip treated with Honeysuckle, Glasurit Glassohyd natura base coat fungicide stain.

Download our latest brochure / price list

Technical Information

The canopy set consist of a pair of gallows brackets, one decorative front truss one open rear truss, two plywood soffit boards, Two tilt fillets and two sprockets. The sizes quoted are Width 1680 mm measured from the extreme ends of the rafter’s foot cut to foot cut. Projection 500 mm Is the total projection from the wall to the edge of the soffit. The standard pitch is 35º. The carcass height above the door is 600mm.

The section of the materials is as follows.
Turton Period Canopy frame

Canopy

Rafter is Ex 75mm x 50mm.
Post is Ex 75mm x 75mm.
Tie rail is Ex 75mm x 75mm.
Shoe is Ex 75mm x 50mm.
Web is Ex 150mm x 25mm.
Plywood soffits 9mm WBP.
Tilt fillet 45° splay cut Ex 75mm x 50mm.
Sprockets Ex 50mm x 25mm tapered and angled.

Gallows Brackets. SG1/T 600mm high 500mm projection.
Head or Beam Ex 75mm x 50mm.
Upright or post Ex 75mm x 50mm.
Brace or gibbet Ex 150mm x 50mm.

Code	Overall Width [mm]	Projection [mm]	Height above door head [mm]	Maximum brick opening [mm]	Pitch	Weight
TI	1680	500	600	1380	35°	27

Available Ex stock.

Optional fixing kit fits all period canopies

Fits all period canopies kit consists of 10 no 100mm 10mm sleeve anchors 18 no tile battens, slaters felt, Cement fibre soffit boards and galvanized nails. 2 no 70mm x 6mm wood screws.

Extra projection is available as a special order.

« Period Canopies Index

We reserve the right to alter without notice the dimension, section, design or configuration
of any of the products listed on this web site, in the interests of product improvement.
Best printed in landscape orientation.