G.R.P. Glass Fibre Products ~ Durotile Dual Pitch G.R.P. Roof Canopies

The Durotile roof are fitted to our PCS/1 1340mm wide range of door canopies in effect you have all the sharp detail of a traditional timber joinery product with the convenience of the complete roof cover in a flat pack to your door.
The Durotile roof is available in Grey or Terracotta and can be plain or with the cement verge picked out in a sand and cement mortar color.
The Durotile set fits our Holcombe, code PCS/H1, Edgeworth code PCS/E1, Walmersley code PCS/W1 and Rivington code PCS/R1.

The glass fibre roofs are workshop fitted to the canopy set then are marked to ease re- assembly and packed in a plywood box to ensure safe delivery. The product is dispatched with full assembly and fixing instructions

The prices quoted below are Ex works and exclude V.A.T.

Delivery cost and V.A.T. will be added when proceeding to the on line checkout.

The Roof cover is a glass fibre mould laminated product. The mould is treated with release agent, gel coated with the required tile colour. Chopped strand mat is catalyzed resin laminated over the gel coat to form the finished moulding. When cured the roof is removed from the mould and is the trimmed to size. If required the verge can be at this stage picked out in a sand coloured grit resin.
The roof moulding has a 90mm high up-stand to receive lead flashing if required.

A special durotile soffit set with a rebated edge to hold the returned G.R.P. flange is built to receive the Durotile roof and crest and is fitted to any of the PCS/1 range of traditional timber period canopy sets.

Please refer to the relevant PCS/1 page for the technical specification for each of the Holcombe, Edgeworth, Walmersey and Rivington canopy sets.