Structural Timber Gallows Brackets ~ Profiled brace on leading edge dual pitch bracket SG100/10T-SG75/16T. S.W.L. from 117 kgs to 351 kgs.

Dual pitch profiled brace bracket, mortise and tenon jointed.

The prices quoted below are Ex works and exclude V.A.T.

Delivery cost and V.A.T. will be added when proceeding to the on line checkout.

The gallows brackets are constructed as follows. The timber is European redwood, kiln dried. All joints are stop mortise and tenon (19mm & 22mm) wide, the joints are glued with urea formaldehyde powder resin mixed with water and brush applied to tenons.

Finish
Planed all round timber. All curved surfaces bandsawn, and spindle moulder planned to profile. Bevels are 10mm and 12mm across the flats. All seen surfaces are twice sanded (80s grit and 100s grit) sandpapers, all arises are removed with glass-paper. The Vee in the leading edge of the brace is power-file finnished.

Decorative features
Stop bevels are applied to leading edges of the head and upright and to four edges of the brace, the bevels are also returned to the inside of the ends of the head and upright.

The leading edge of the brace has double convex and concave curves with a plumb cut in the center and at the foot.

Assembly
Glued components hand assembled, pneumatically clamped. All joints secured with headless aluminium pins.

Safe Working Load
The safe working load is stated for each product below, this has been calculated at a factor of safety of six.

Structural Suitability
Calculations to find the load including snow,wind load etc should be obtained to prove the suitability of the product for your application.

Treatment
Dip treated with Gasurit glassohyd natura base coat fungicide stain.

Packaging
Products banded, corner protected and cling film wrapped.

Delivery
Usually dispatched next day.