Galvanized Mild Steel Post Bases ~ Mild Steel Flanged Pins

Main Image
GSF/PIN/0 Titled
More Image
  • GSF/PIN/0 Titled
  • GSF/PIN3 Titled
  • GSF/PIN1 Titled
  • GSF/PIN2 Titled
  • GSF/PIN4 Titled
  • GSF/PIN Titled

Please click on the images to view them.

Prices
CodeHeightBase flange sizeSupport flange sizeHeight of flange from baseS.W.L. in KnWeightPrice
GSF/PIN21090 x 9090 x 90130391.528.00
GSF/PIN0150150 x 15090 x 901001882.0029.75
GSF/PIN1150150 x 150130 x 1301001882.5029.75
GSF/PIN2200150 x 150130 x 130140632.7529.75
GSF/PIN3420150 x 150130 x 130347193.7532.29
GSF/PIN4420150 x 150130 x 130347193.7437.48
Description
Our range of Gavanised Steel post bases are designed to be resistant to exposure to the elements. By keeping the timber post above the ground level out of the damp areas and allowing the post foot to dry out after rain it helps prevent decay and prolong the life of the post.

The products are made from steel round bars with two square plates welded to the bar. To be built into masonry or to be concreted into the ground.

The prices quoted below are Ex works and exclude V.A.T.

Delivery cost and V.A.T. will be added when proceeding to the on line checkout.
Technical Information
The square plates are welded onto the bar at the base and at various distances
up from the base. Holes are drilled to receive sleeve bolts and wood screws. The completed product is hot dip galvanized.

The safe working load denoted as S.W.L. in the tables are calculated using a factor of safety of six.

For approximate converting the safe working load in Kn into tonnes divide by 10.
Specification
  • GSF/PIN 210mm high, 20mm diameter bar, with two 90mm x 90mm x 6mm square plates,
  • one at the base, one 130mm high from the base welded under side only to top plate.
  • Hot dip galvanized. To be built into masonry. The flange plate is drilled with one 4mm hole for screw fixing.
  • GSF/PIN0 150mm high, 25mm diameter bar, 150mm x 150mm x 6mm square base plate
  • and 90mm x 90mm x 6mm square support plate, at 100mm high from the base, welded
  • under side only to top plate. The flange plate is drilled with two 6mm holes for screw fixing.
  • Hot dip galvanized.
  • To be built into masonry or fixed to concrete or tile floor finish. The base plate is drilled
  • with four 12mm holes for m10 sleeve bolts or resin anchors.
  • GSF/PIN1 150mm high, 25mm diameter bar, 150mm x 150mm x 6mm square base plate
  • and 130mm x 130mm x 6mm square support plate, at 100mm high from the base, welded
  • under side only to top plate. The flange plate is drilled with two 6mm holes for screw fixing.
  • Hot dip galvanized.
  • To be built into masonry or fixed to concrete or tile floor finish. The base plate is drilled
  • with four 12mm holes for m10 sleeve bolts or resin anchors. The flange plate is drilled with one 6mm hole for screw fixing.
  • GSF/PIN2 200mm high, 25mm diameter bar, 150mm x 150mm x 6mm square base plate
  • and 130mm x 130mm x 6mm square support plate, at 146mm high from the base, welded
  • under side only to top plate. The flange plate is drilled with one 6mm hole for screw fixing.
  • Hot dip galvanized.
  • To be built into masonry or fixed to concrete or tile floor finish. The base plate is drilled
  • with four 12mm holes for m10 sleeve bolts or resin anchors. The flange plate is drilled with one 6mm hole for screw fixing.
  • GSF/PIN3 420mm high, 25mm diameter bar, 130mm x 130mm x 6mm square flange
  • at 354mm high from the base, welded under side only to top plate. The base is
  • 150mm x 150mm x 6mm. Hot dip galvanized.
  • To be concreted in the ground or built into masonry.
  • The flange plate is drilled with one 6mm hole for screw fixing.
  • GSF/PIN4 420mm high, 25mm diameter bar, 130mm x 130mm x 6mm square flange
  • at 354mm high from the base, welded under side only to top plate. The base is
  • 150mm x 150mm x 6mm. Hot dip galvanized.
  • To be bolted down to a concrete base, concreted in the ground or built into masonry.
  • The base plate is drilled with four 12mm holes for m10 sleeve bolts or resin anchors. The flange plate is drilled with one 6mm hole for screw fixing.
Associated Products
  • GMS/PIN TITLED

    Galvanized Steel Pin

    £3.60

    More Info

  • P6

    Green Oak Stop Bevelled Posts

    £112.00 - £263.00

    More Info

  • GSS_A Titled

    Mild Steel Galvanized Post Shoe

    £37.50

    More Info

  • RA/SET/2

    Resin anchor fixings

    £2.85 - £4.51

    More Info

  • Guy Link 1

    Stainless Steel Guy Links GUY/L1-GUY/L2-...

    £4.48 - £99.82

    More Info

  • SSB1 to SSB4 Stainless Steel post bases group

    Stainless Steel post base form 150mm high...

    £1.64 - £71.32

    More Info

  • P1

    Timber stop bevelled posts

    £18.94 - £80.16

    More Info

<< Back to Previous Page
Our website uses cookies. By using our website you consent to this. To find out more click here.