Timber Period Canopies ~ Cross Over Canopy Set

The Cross Over Canopy is a high quality duel pitch softwood joinery product, designed to suit door openings of 1400mm. The canopy can receive tiles, slate, felt tiles The canopy can receive tiles, slate, felt tiles and is dip treated with Honeysuckle, Glasurit Glassohyd natura base coat fungicide stain.

Bespoke products are made from the original design (pitch, size of the components can vary) to your requirments.

The prices quoted below are Ex works and exclude V.A.T.

Delivery cost and V.A.T. will be added when proceeding to the on line checkout.

The canopy set consist of a pair of gallows brackets, one decorative front truss two open rear trusses, two barge boards, two fascia boards, two plywood soffit boards and six sprockets. The sizes quoted are Width 1700 mm is measured from the extreme ends of the fascia board to fascia board. Projection of 600mm is the total projection from the wall to the edge of the Barge board.
The standard pitch is 42°The canopy is constructed from European red deal fifths, or unsorted grade timber. The plywood used is hardwood WPB exterior far eastern. The joints are mortise and tenon to all framework and brackets. All seen surfaces are twice sanded 80s grit and 100s grit. This canopy will allow the use of clay or concrete ridge tiles. Our products are dip treated with Honeysuckle, Glasurit Glassohyd natura Base coat fungicide stain to give envelope whether protection for up to six weeks prior to painting or stain finishing on site. Our canopies are sent to site flat pack for Convenience and are quickly assembled using our fixing instructions and drawings Provided.