Timber Period Canopies ~ Coltishall Canopy Set

The Coltishall Door Canopy is a high quality duel pitch softwood joinery product, designed to suit door openings from 900mm to 1090mm wide. The canopies can receive tiles, slate, felt tiles and is dip treated with Honeysuckle, Glasurit Glassohyd natura base coat fungicide stain.

Bespoke products are made from the original design (pitch, size of the components can vary) to your requirments.

The prices quoted below are Ex works and exclude V.A.T.

Delivery cost and V.A.T. will be added when proceeding to the on line checkout.

The canopy set consist of a pair of gallows brackets, one decorative front truss two open rear trusses, two plywood soffit boards. Two fascia boards and six sprockets. The sizes quoted are Width 1310mm is measured from the extreme ends of the fascia board to fascia board. Projection of 500mm is the total projection from the wall to the edge of the soffit.
The standard pitch is 45°The canopy is constructed from European red deal fifths, or unsorted grade timber. The plywood used is hardwood WPB exterior far eastern. The joints are mortise and tenon to all framework and brackets. All seen surfaces are twice sanded 80s grit and 100s grit. Clay or concrete ridge tiles can be used with this product.
Our products are dip treated with Honeysuckle, Glasurit Glassohyd natura Base coat fungicide stain to give envelope whether protection for up to six weeks prior to painting or stain finishing on site. Our canopies are sent to site flat pack for Convenience and are quickly assembled using our fixing instructions and drawings Provided.