Galvanised Post Bases Sheffield

Consider Galvanised Post Bases Sheffield

 

 

Galvanised post bases also are named supports or shoes. By installing post bases you will help prevent rot and increase the life span of your fence posts. They will allow for moisture to exit because they are not right into the floor as traditionally these would be set in cement foundations. our post bases enable the posts to be raised above the ground, while remaining fixed firmly to a cement footing, holding the moistness from the posts. 

 

 

A Huge Choice of Galvanised Post Bases 

 

 

Right here at Canopy Products, you will find a wonderful choice of galvanised post bases to fit pretty much all sizes of post. Our complete variety of galvanised post bases could very well be constructed into brickwork, cemented in to place or fixed to a layer of concrete.

 

 

Plate Post Bases

 

 

At Canopy Products, our galvanised plate post bases are created to be resistant to exposure to the weather. By maintaining the wood post above ground level out from the wet places, allowing for the post foot to dry after rain it can help reduce rot and extend the life span in the post.

 


Cup Post Bases (Galvanised)

 


Our galvanised post shoe bases (or cup post bases) are resistant to weather conditions. By keeping the wood post over ground level out from the moist areas , allowing the post foot to dry following bad weather this can help to prevent decay and expand the life span of the posts.

 

 

Tips on How to Fit Galvanised Post Bases Sheffield

 

 

Our Galvanised Post Bases Sheffield can certainly be secured to cement using 2 No 100 mm x M10 thru-bolts or may be concreted into your foundation. The timber post could very well be fixed into the base with two 40mm x 8mm coach screws where neccessary. Fixing kits are generally offered take a look at the fixing section. 

 

The 60 mm deep metal cup is usually cut from 100mm x 100mm x 3mm wall steel box section. The cup is drilled with 2 No 10mm holes. A 12mm drain and 35mm post hole is going to be laser cut to profile for the sole plate. The sole plate to be 93.5mm x 93.5mm x 3mm. The 150mm x 150mm x 3 mm base plate is laser cut having a 35mm post hole and 2 No x 12mm holes within the corners on the base plate for getting fixing bolts if necessary. Welded into the base plate and a steel tube, the cup shall be fixed. 

 

The safe working load is measured by using a factor of safety of six. For approx. conversion of the SWL in to tonnes divided by 10.

 


Galvanised Post Bases Sheffield Overnight Delivery

 

 

Ring the experts at Canopy Products on 01706 822665 with regard to Galvanised Post Bases Sheffield.

 

The price of the Galvanised Post Bases Sheffield exclude delivery fees