Fittings Kit Includes:
Resin Kit Includes:
• Decorative upright has a return Ovlo-Scotia combination mould to the outer face at its base. The head has a return Scocia mould to the lower edge at the outer end of the head. The brace has a semi circular relief profile to the leading and trailing edges. Stop bevels on the leading edges of the head, upright and brace.
• The prices quoted are for single items not per pair and exclude delivery cost which will be added when proceeding to the online checkout.
•Technical- The timber is European Vth redwood, kiln dried laminated with D4 polyurethane glue, for added stability. All joints are stop mortise and tenon (22mm) wide with twin mortise and tenons to the heads and uprights, the joints are glued with urea formaldehyde powder resin (Cascamite) mixed with water and brush applied to tenons. The mortise and tenon joints are pneumatically clamped and the joints are drilled with a 19mm hole. Hardwood dowels are glued and driven into the joints. Finish Planed all round timber. All curved surfaces bandsawn, and spindle moulder planned to profile. Bevels are 10mm and 12mm across the flats. All seen surfaces are twice sanded (80s grit and 100s grit) sandpapers. The safe working load is stated with a factor of six. Calculations to find the load should be obtained to prove the suitability of the product for your application.