Cup Post Bases London

Order Cup Post Bases London

 
Cup Post Bases London
 
 
 
Galvanised post bases can also be named supports or shoes. By installing post bases you will help stop rot and expand the life span of the posts. Considering that the wooden posts will not be directly in the ground however in the galvanised post base, the moisture may exit the post. the post bases enable the post to be elevated out of ground level, whilst still being secured firmly into a concrete footing, keeping the dampness from the posts. 
 
 
 
 
 

The Selection of Cup Post Bases London

 
 
 
 
Right here at Canopy Products, we have a very good choice of post bases to fit most sizes of post. Our full range of galvanised post bases may be built into brickwork, concreted into place or set in to a concrete slab.
 
 
 
 
 

Plate Post Bases

 
 
 
 
 
Our galvanised plate post bases are created to be protected from exposure to the weather conditions. By keeping the wooden post above ground level out from the moist parts , allowing the post foot to dry out after precipitation it helps hinder decay and prolong the life span with the post.
 
 
 
 

Cup Post Bases (Galvanised)

 
 
 
 
Our galvanised post shoe bases (or cup post bases) are resistant to weather conditions. By maintaining the timber post over ground level out from the wet areas and allowing for the post foot to dry out following precipitation this can help to stop decay and expand the life span of the wooden posts.
 
 
 
 
 

Fixing Our Cup Post Bases London

 
 
 
 
 
Fix to concrete using 2No 100mm x M10 thru-bolts. You are able to cement post bases to the foundations. Fixing kits can be obtained with many post bases, see the specs for each product. 
 
 
 
The 60 mm deep steel cup is cut from 100mm x 100mm x 3mm wall steel box section. 2 No 10mm holes are drilled into the cup. A 12mm drain and 35mm post hole is going to be laser cut to profile in the sole plate. The sole plate is 93.5mm x 93.5mm x 3mm. The post is a 300mm x 34.5 x 2mm wall tube. Welded to the base plate and a steel tube, the cup will be fixed. 
 
 
 
The completed shoe is hot dip galvanised. . The SWL (Safe Working Load) is worked out having a factor of safety of six. For estimated conversion of the SWL in tonnes divided by 10.
 
 
 
 

The Supply of Cup Post Bases London

 
 
 
 
 
Speak to professionals on 01706 822665 for Cup Post Bases London.