Check Out The Best Canopies Online. Shop Now!

High Quality


Galvanised Plate Post Bases Chester



Galvanised Plate Post Bases may also be named supports or shoes. By installing post bases you are going to assist in preventing rot and lengthen the life of the posts. They are going to permit water to leave the posts as they’re not right into the floor as traditionally they would be set in cement foundations. the post bases permit the post to be raised above the ground, while still being anchored tightly into a concrete footing, holding the moistness away from your wooden posts.

The Assortment of Galvanised Mild Steel Post Bases

At Canopy Products, we have a good range of post bases to fit almost all sizes of post. Our post bases can be permanently fixed in concrete in the ground, in to a layer of concrete, and/or constructed in brickwork.

Galvanised Plate Post Bases

At Canopy Products, our plate post bases are designed to be protected from exposure to the elements. By maintaining the wooden post above ground level out of the moist places , permitting the post foot to dry out after bad weather it will help you to protect against rot and increase the life span with the post.

Galvanised Cup Post Bases by Canopy Products

Galvanised cup post bases are devised to be weather proof. Just as with the post bases above, keeping the wooden post higher than ground level assures moisture will be able to drain out this aids you to eliminate rot and decay.

Tips on How to Fit Galvanised Plate Post Bases Chester

Our Galvanised Plate Post Bases Chester are usually fixed to concrete making use of 2 No 100 mm x M10 thru-bolts or may be concreted in the foundation. The wooden post could very well be secured into the base by using two 40mm x 8mm coach screws as appropriate. Fixing kits are available take a look at the fixing section.

The 60 mm deep metal cup is going to be cut from 100mm x 100mm x 3mm wall steel box section. 2 No 10mm holes are drilled into the cup. A 12mm drain and 35mm post hole is going to be laser cut to profile on the sole plate. The sole plate being 93.5mm x 93.5mm x 3mm. The 150mm x 150mm x 3 mm base plate is laser cut that has a 35mm post hole and 2 No x 12mm holes on the corners on the base plate for fixing bolts . The cup is welded to the base plate and to the steel tube.

The safe working load is measured by using a factor of safety of six. For estimated conversion of the SWL into tonnes divided by 10.

Shipping of Galvanised Plate Post Bases Chester

Right here at Canopy Products, we develop and deliver top quality Galvanised Plate Post Bases Chester. Contact us today to see how we’re able to assist you.

The prices of the Galvanised Plate Post Bases Chester don’t include shipping and delivery fees


  • Featured
  • Best Selling
  • On Sale
  • Top Rated
  • Recent
Back to Top