PRODUCT CODE: F-PCS-H4
Holcombe period Dual pitch timber door canopy 2200mm wide, 600mm projection-Made to order- Code - F-PCS-H4

The Holcombe Door Canopy is a high quality dual pitch softwood joinery product. (FSC - INT-COC-003944.274)

• ++++Note this canopy is made to order, please allow 3 weeks+++++
• Please ignore the stock level shown.

2200mm wide, 600mm projection, 1070mm high above door head, 1654mm maximum brick opening, 45° pitch, weight 64kg- F-PCS-H4 •The canopy can receive tiles, slate, felt tiles. It comes with a pair of F-SG-6T gallows brackets. Dip treated with base coat stain allowing you to stain or paint to your requirements. Bespoke products are made from the original design (pitch, size of the components can vary) to your requirements. •Technical- The canopy set consist of a pair of gallows brackets, one decorative front truss one open rear truss, two plywood soffit boards, two tilt fillets and two sprockets. The width is measured from the extreme ends of the rafter’s foot cut to foot cut. The canopy is constructed from European red deal fifths. The joints are mortise and tenon to all framework and brackets. All seen surfaces are twice sanded 80s grit and 100s grit. The finials on some of the range are designed to stand off from the canopy carcass to allow the use of clay or concrete ridge tiles. Our canopies are sent to site flat pack for convenience and are quickly assembled using our fixing instructions and drawings provided. •Prices exclude delivery and product is made to order. •Optional fixing kit is available. See fixings section. Fittings Kit Includes:

• 6 No 150mm AND 4No 100mm x 10mm SLEEVE ANCHORS.
• 18 No TILE BATTENS, SLATERS FELT CEMENT FIBRE SOFFIT BOARDS AND GALVANIZED NAILS 2 No 70mm x 6mm WOOD SCREWS.