The Ashworth 2 door Canopy is a high quality dual pitch softwood joinery product. (FSC - INT-COC-003944.274) 1735mm wide, 700mm projection, 890 high above door height, maximum brick opening 1300mm, 45° pitch, weight 28kg- F-ASHWORTH2
- The canopy can receive your tiles, slate or felt tiles and comes with a pair of F-GS2 gallows brackets
- Technical:- The canopy set consists of a pair of gallows brackets, one king post front truss, two open rear trusses, two plywood soffit boards, two tilt fillets, two sprockets and is dip treated with base coat microporus stain to give protection up to six weeks prior to painting. The sizes quoted are measured from the extreme ends of the fascia boards. Projection 700mm is the total projection from the wall to the outermost edge of the truss. Rafter is ex 100mm x 50mm. King post is ex 100mm x 50mm. Tie rail is ex 100mm x 75mm. Fascia board ex 225mm x 25mm and plywood soffits are 9mm.
- On the bottom chord where the timber meets the rafter we have left a 25mm gap either side of the posts/purlin. This can be birdsmouthed also to give you more width if required.
- Prices exclude delivery and available for next day delivery •Optional fixing kit available see fixing section
