Check Out The Best Canopies Online. Shop Now!

High Quality

STAINLESS STEEL POST SUPPORTS CHESTER

Stainless Steel Post Supports Chester

STAINLESS STEEL POST SUPPORTS CHESTER

INVEST IN STAINLESS STEEL POST SUPPORTS CHESTER

Stop rot in your fencing post by putting in our Stainless Steel Post Supports. Additionally often called shoes, these types of fencing components add years to the life span of your fencing. They are going to allow for water to exit the posts as they are not straight in the ground as traditionally these would be positioned in cement foundations. Shipped by injection to Chester as well as Nationwide, these post bases permit the post to be elevated out of ground level, while still being fixed tightly into a concrete footing, holding the water away from your wooden posts.

The Range of Stainless Steel Post Supports

Our ranges are post bases are built to hold wooden posts of any size and all our standard post sizes. Our complete variety of galvanised post bases can be built into masonry, cemented into place or mounted to a concrete slab.

Cup Post Bases (Galvanised)

Our galvanised post shoe bases (or cup post bases) are designed to be resistant to wet conditions. By keeping the wooden post higher than ground level out of the wet areas , allowing the post foot to dry out after rainfall this helps to stop decay and increase the life span of the wooden posts.

Tips on How to Fit Stainless Steel Post Supports Chester

Fix to cement using 2 100mm x M10 thru-bolts. You could concrete the post bases in the foundations. The timber post could be fixed to the base with not one but two 40mm x 8mm coach screws if required. Fixing kits usually are readily available see fixing section.

Cup post bases are actually 60mm deep, 100mm x 100mm x 3mm. The cup is drilled with 2 No 10mm holes. The 93.5mm x 93.5mm x 3mm sole plate which has a 12mm drain and 35mm post hole are laser cut to profile. The 150mm x 150mm x 3 mm base plate is laser cut with a 35mm post hole and two No x 12mm holes in the corners on the base plate for fixing bolts if needed. Welded to the base plate and a steel tube, the cup will be secured.

The SWL (Safe Working Load) is measured having a factor of safety of six. For estimated conversion of the SWL in tonnes / ten.

Stainless Steel Post Supports Chester Next Day Distribution

Phone the experts at Canopy Products on 01706 822665 with regard to Stainless Steel Post Supports Chester.

The price of our Stainless Steel Post Supports Chester exclude delivery fees

ACCOYA PRODUCTS

  • Featured
  • Best Selling
  • On Sale
  • Top Rated
  • Recent
Back to Top