Additionally often called bases, these types of fencing components add years to the life of the fencing. . Delivered by injection to Derby and also Countrywide, these kind of Stainless Steel Post Supports enable the posts to be raised above the ground, whilst remaining secured tightly to the concrete foundation, protecting the moistness away from your posts.
Here at Canopy Products, we have a very good selection of post bases to fit almost all sizes of post. Our complete variety of galvanised post bases could very well be built in masonry, concreted into place or set in to a concrete slab.
Our galvanised steel post shoe bases (or cup post bases) are created to be resistant to the weather. By continuing to keep the wooden post higher than ground level out from the damp areas and allowing for the post foot to dry out following precipitation this helps to prevent decay and extend the life span of the post.
Each of our Stainless Steel Post Supports Derby can certainly be fixed to cement working with 2 No 100 mm x M10 thru-bolts or could be concreted in the foundation. Fixing kits are available with many post bases, view the specifications per product.
The 60 mm deep steel cup post base is actually cut from 100mm x 100mm x 3mm wall steel box section. 2 No 10mm holes are drilled into the cup. A 12mm drain and 35mm post hole is going to be laser cut to profile to the sole plate. The sole plate being 93.5mm x 93.5mm x 3mm. The cup is welded on the base plate and the steel tube.
The SWL (Safe Working Load) is measured employing a factor of safety of six. For approx. conversion of the SWL in to tonnes divided by 10.
Stainless Steel Post Supports Derby are accessible for following day distribution. Get a hold of us on 01706 822665.