Stainless Steel Post Supports Nottingham

Order Stainless Steel Post Supports Nottingham

 

 

Additionally named bases, or shoes, they will add many years to the life span of your fence. They'll enable water to depart because they are not right in the ground as historically they would be set in concrete foundations. the post bases permit the post to be raised above the ground, whilst still being secured firmly into a cement foundation, protecting the water away from your posts. 

 

 

Our Range of Stainless Steel Post Supports Nottingham
 

 

Our ranges are post bases are designed to carry timber posts of any size and of course including the standard post sizes. Our complete range of post bases may be constructed into brickwork, cemented in the earth or mounted to a concrete slab.

 

 

Galvanised Plate Post Bases

 

 

At Canopy Products, our plate post bases are created to be resistant to exposure to the elements. By preserving the timber post higher than ground level out from the moist zones and allowing the post foot to dry out after bad weather it can help hinder decay and increase the life span in the post.

 


Galvanised Cup Post Bases by Canopy Products

 


Galvanised cup post bases are designed to be weather resistant. Just like the post bases above, maintaining your post above ground level helps ensure water will drain out and this aids you to minimize rot .

 

 

Fittng Stainless Steel Post Supports Nottingham

 

 

The Stainless Steel Post Supports Nottingham may be fixed to cement making use of 2 No 100 mm x M10 thru-bolts or might be concreted into the foundation. The timber post could very well be fixed to the base with two 40mm x 8mm coach screws when necessary. Fixing kits usually are available see each fixing section. 

 

The 60 mm deep metal cup is cut from 100mm x 100mm x 3mm steel box section. 2 No 10mm holes are drilled in the cup. A 12mm drain and 35mm post hole will undoubtedly be laser cut to profile in the sole plate. The sole plate to be 93.5mm x 93.5mm x 3mm. The 150mm x 150mm x 3 mm base plate is laser cut which has a 35mm post hole and 2 No x 12mm holes on the corners on the base plate for getting fixing bolts if required. The cup is welded on the base plate and the steel tube. 

 

The SWL (Safe Working Load) is measured using a factor of safety of six. For approximate conversion of the SWL into tonnes divided by 10.

 


Stainless Steel Post Supports Nottingham Next Day Delivery

 

 

Simply call the professionals on 01706 822665 to get Stainless Steel Post Supports Nottingham.

 

Prices don't include delivery