Canopy Products in partnership with Simson Strong Tie is pleased to offer the CCQ Column Cap.
Current lead time is around 12 working days
The CCQ type column cap can be made to order for all standard timber or engineered timber sizes.
Please down load the qoutation form and fill in the measurements required for a qoute.
Please send to [email protected]
DO NOT ORDER THROUGH THE SITE PLEASE
- CCQ Column Caps are suitable for most post to beam installations using SSH8.0X60 connector screws (supplied with the caps).
- Specify the variable dimensions as shown in the column cap made to order form.
- Hot dip galvanised mild Steel
- Installation. Install SSH screws with a 13mm hex head socket or T40 Torque drive bit. the use of a torque drill rather than an impact driver is recommended.
- Easily and quickly installed with SSH screws supplied so no drilling for bolt holes or sourcing different length bolts required.
- All referenced dimensions are internal.
