Check Out The Best Canopies Online. Shop Now!

High Quality

GALVANISED PLATE POST BASES BIRMINGHAM

Galvanised Plate Post Bases Birmingham

GALVANISED PLATE POST BASES BIRMINGHAM

OBTAIN GALVANISED PLATE POST BASES BIRMINGHAM

Also often known as shoes or supports, they will add many years to the life span of your fencing. . our post bases allow the posts to be raised above the ground, whilst still being secured tightly into a cement footing, protecting the wet from the posts.

A Vast Range of Galvanised Plate Post Bases

At Canopy Products, you can find a very good selection of Galvanised Plate Post Bases to fit pretty much all sizes of post. The post bases is going to be permanently fixed directly into concrete in the ground, to a layer of concrete, and/or built in masonry.

Plate Post Bases

At Canopy Products, our galvanised plate post bases are designed to be resistant to exposure to weather. By keeping the wood post higher than ground level out from the wet areas and allowing for the post foot to dry out after rain it will help you to reduce decay and extend the life of the post.

Galvanised Cup Post Bases by Canopy Products

Our steel post shoe bases (or cup post bases) are resistant against weather conditions. By preserving the timber post above ground level out of the wet areas and allowing the post foot to dry after bad weather this helps to stop decay and prolong the life span of the wooden posts.

Fittng Galvanised Plate Post Bases Birmingham

Galvanised Plate Post Bases Birmingham are usually secured to cement working with 2 No 100 mm x M10 thru-bolts or could be concreted into the foundation. The wooden post can be secured to the base with a couple of 40mm x 8mm coach screws if need be. Fixing kits usually are readily available take a look at each fixing section.

Cup post bases are generally 60mm deep, 100mm x 100mm x 3mm. The cup is drilled with 2 No 10mm holes. A 12mm drain and 35mm post hole is going to be laser cut to profile for the sole plate. The sole plate is 93.5mm x 93.5mm x 3mm. The 150mm x 150mm x 3 mm base plate is laser cut along with a 35mm post hole and two No x 12mm holes in the 4 corners of the base plate to receive fixing bolts if needed. The cup is welded to the base plate and to the steel tube.

The safe working load is assessed with a factor of safety of six. For estimated conversion of the SWL in to tonnes divided by 10.

Shipping of Galvanised Plate Post Bases Birmingham

Galvanised Plate Post Bases Birmingham are accessible for following day delivery. Get in touch with us on 01706 822665.

TIMBER PRODUCTS

  • Featured
  • Best Selling
  • On Sale
  • Top Rated
  • Recent
Back to Top