Check Out The Best Canopies Online. Shop Now!

High Quality

GALVANISED POST SHOES BRISTOL

Galvanised Post Shoes Bristol

GALVANISED POST SHOES BRISTOL

ORDER GALVANISED POST SHOES BRISTOL

Stop rot in your fencing post by using galvanised post bases by Canopy Products. Additionally referred to as supports, or shoes, such fencing components add many years to the life of the fencing. They’re going to permit moisture to exit because they’re not straight in the floor as in the past these would be set in cement footings. Delivered directly to Manchester and also all over the country, these types of post bases permit the posts to be raised up from the ground, while continuing to be secured tightly into a concrete footing, protecting the dampness from the posts.

A Broad Range of Galvanised Post Shoes

At Canopy Products, you will find a good choice of post bases to fit most sizes of post. Our whole selection of galvanised post bases could very well be constructed into brickwork, concreted in to the earth or permanently fixed to a concrete slab.

Galvanised Plate Post Bases

At Canopy Products, our galvanised plate post bases are designed to be protected from exposure to weather conditions. By maintaining the timber post higher than ground level out from the wet areas and allowing the post foot to dry after precipitation it will help eliminate rot and extend the life in the post.

Galvanised Cup Post Bases

Galvanised cup post bases are manufactured to be weather resilient. Similar to the other post bases, keeping the timber post higher than ground level would ensure water is able to drain away and this aids to eliminate rot and decay.

The Way to Fit Galvanised Post Shoes Bristol

Galvanised Post Shoes Bristol could be secured to cement working with 2 No 100 mm x M10 thru-bolts or may be concreted into the foundation. The wood post could be fixed into the base with not one but two 40mm x 8mm coach screws if necessary. Fixing kits are available take a look at the fixing section.

The 60 mm deep steel cup is actually cut from 100mm x 100mm x 3mm steel box section. 2 No 10mm holes are drilled in the cup. A 12mm drain and 35mm post hole is going to be laser cut to profile to the sole plate. The sole plate to be 93.5mm x 93.5mm x 3mm. The post is a 300mm x 34.5 x 2mm wall tube. Welded into the base plate and a steel tube, the cup is going to be fixed.

Galvanised Post Shoes Bristol Following Day Distribution

ACCOYA PRODUCTS

  • Featured
  • Best Selling
  • On Sale
  • Top Rated
  • Recent
Back to Top